ATi HD 48xx Driver (for OS X 10.5.7 beta)

10.5.7 베타버전에서 추출한 ATi HD48xx 제품군의 드라이버입니다

알려진 문제는 마우스 점프 현상과 화면 떨림, 화면 떨굼 등의 문제가 있습니다.
이경우 아래 Natit_no_powerplay_4800_4600.pkg 를 설치하면 효과가 개선될 수도 있습니다.

CI/QE가 활성화가 되지 않는 경우에서 추출) 을 다운로드 받으셔서
기존 OpenGL.framework 을 대체하시기 바랍니다. (BetterZip 1.8 로 압축)

해상도가 제대로 지원되지 않는 경우
Natit_with_4850_bios_inside.pkg 를 받으셔서 드라이버 설치하기 바랍니다. ^^

Ps. 아직 정식으로 Mac OS X 10.5.7 버전이 나오지 않은 상태이므로 안정성을 담보해드릴 수 없습니다. ^^a

-- attach --
원문 :

A few days ago, Netkas was able to get QE/CI & resolution change on his 4850 by using some brand new 10.5.7 kext's.

Below is a tutorial on how to get it working:
1. Download this to your desktop: [] [Mediafire] [Badongo] [DepositFiles]

2. Run the installation package. When it's done, you'll need to SHUT DOWN YOUR COMPUTER.

3. Take your DVI cable, and plug it in the DVI port nearest to your motherboard.

4. Take your DVI>VGA adapter (just the adapter, not the cable), and plug it in to the other DVI port.

5. Startup your computer, and boot with -f.

You should now have QE/CI along with resolution change on your 4850 or 4870! All credit needs to go to netkas!

If you have a 4870 and don't have QE/CI, follow the below instructions:
1. Download this:
2. Backup your existing OpenGL.framework and replace it with the new 10.5.7 framework, repair permissions, and reboot.

Your 4870 should now have QE/CI.

1. You may be getting a jumpy/bouncy screen on your 4850 when you move your mouse.
>>FIX FOR NUMBER 1: Download this package ( and install it. Reboot, and it should all be fine.
2. You may get a black screen when changing resolutions.
>>FIX FOR NUMBER 2: Download and install this package ( Reboot, and you should be able to change resolutions without any problems.
3. You may get a light blue screen after doing a hard-restart
>>FIX FOR NUMBER 3: Boot with -s, and do the following commands:
/sbin/mount -uw /
cd /system/library/extensions
rm -r natit.kext
rm -r atiradeonx2000.kext
It should go into OS X just fine. From here, you can reinstall the drivers, reboot, and all should be fine again.
Trackback 0 Comment 0
prev 1 ··· 22 23 24 25 26 27 next